BG Brake Fluid Test Strip

The BG Brake Fluid Test Strip is the perfect on-site method of testing the brake fluid for serviceability. Part No. PF9100 100 strips

BG Super DOT 4 Brake Fluid

Formulated to meet or exceed the quality requirements of Domestic and European automobile manufacturers, BG Super DOT 4 goes beyond regular DOT 4 to provide the ultimate in high temperature, high boiling point protection. It surpasses other DOT 4 formulations by increasing flow at low temperatures while protecting against high temperature fade. BG Super DOT 4 meets and exceeds the Federal Motor Vehicle Safety Standard 116, SAE J1704, and ISO 4925. It will provide excellent corrosion prevention, and help maintain precise braking efficiency. Can be used in place of other Super DOT 4 or DOT 4 Plus brake fluids, especially found in the European market. Part No. 83532 Part No. 83564 32 oz. (946 mL) bottle 64 oz. (1892 mL) bottle

BG DOT 4 Brake Fluid Ultra-Dry Flushing Formula

BG DOT 4 Brake Fluid is a premium grade fluid that greatly exceeds the minimum DOT wet boiling point specifications for DOT 4 fluids. This makes BG DOT 4 Brake Fluid an excellent flushing product, ensuring the driest possible fluid is installed in the system, assuring maximum brake component life. BG DOT 4 Brake Fluid inhibitor system provides excellent rust and corrosion protection throughout the braking system. Part No. 84032 Part No. 84048 Part No. 84064 Part No. 8402 32 oz. (946 mL) bottle 48 oz. (1.42 L) bottle 64 oz. (1.89 L) bottle 2.5 gal. (9.46 liter) bottle

BG DOT 3 Brake Fluid Ultra-Dry Flushing Formula

BG DOT 3 Brake Fluid is a premium grade fluid for vehicles that require DOT 3 fluid only. This formula exceeds the minimum DOT specifications for DOT 3 fluid and makes an excellent flush because of its dryness and heavy duty additive system. It provides superior rust and corrosion protection throughout the braking system. Part No. 85032 Part No. 85048 Part No. 85064 Part No. 8502 32 oz. (946 mL) bottle 48 oz. (1.42 L) bottle 64 oz. (1.89 L) bottle 2.5 gal. (9.46 liter) bottle

BG Brake Stop Squeal

Most brake noise is caused by vibrations that occur when pressure is applied. BG Stop Squeal works on the simple principle of impregnating the brake pad with ingredients that reduce sticking between the pad and rotor. When pressure is applied, the vibrations are significantly reduced, thus brake noise is stopped or is markedly less noticeable. Part No. 860 Part No. 86032 1 oz. bottle , 32 oz. (946 mL) can

BG 403 Non-Chlorinated Brake Cleaner

Safely, effectively, rapidly degreases brake linings, drums, cylinders, springs, disc brake pads and other brake parts. Easy to use—applied without disassembling the brake unit. Contains no chlorofluorocarbons. Part No. 403 Net Wt: 15 oz. (425.3 grams) Volume: 19.11 fl. oz. (565 mL)

BG 402 Brake & Contact Cleaner

Improves efficiency of braking systems, aids in elimination of brake squeal and chatter. Fast-acting solvents quickly remove brake fluid, grease, oil, moisture and other residue from both drum and disc type assemblies. Cleans and dries distributor parts, spark plugs, magnetos, electrical contacts and relays. Part No. 402 Net Wt: 19.75 oz. (560 grams), Volume: 12.58 fl. oz. (372 mL)

BG Brake Fluid Test Strip

The BG Brake Fluid Test Strip is the perfect on-site method of testing the brake fluid for serviceability. Part No. PF9100 100 strips

BG Brake Lube

BG Brake Lube is a truly unique, multi-purpose grease which represents the most advanced technology in grease lubrication. It performs exceptionally well in automotive, marine and industrial environments, in hot or cold temperatures, under wet or dry conditions, and with light or heavy loads. BG Brake Lube will mix with virtually any other soap-based grease. Seal compatibility is excellent in a wide variety of materials such as Hytrel,В® VitonВ® and Neoprene. HytrelВ® and VitonВ® are registered trademarks of DuPont Dow Elastomers. Part No. 608BK 5 cc packet

BG PF7 Brake Service System

Operation of disc brakes creates extremely high temperatures which can cause rapid oxidation of the brake fluid. New Anti-lock Brake Systems (ABS) are sensitive to this fluid deterioration. Deposit and varnish buildup can lead to serious malfunction of the braking system as well. For this reason, some auto manufacturers are making regular flushing and fluid replacement a requirement of brake system maintenance. The BG PF7 will quickly and effectively flush all oxidized and corrosive fluid from the entire braking system. A visible indicator tells the technician when it needs refilling, to prevent the unit from running out of fluid during service. Used brake fluid is captured and contained in a 2.5 gallon jug that is suitable for storage until the fluid can be recycled. Part No. PF7